The sprung drawbar has a 20mm full length plate welded underneath it, with a complete 6mm top cover, folded and welded on top.
The swivelling drawbar ring allows oscillation between tractor and trailer, reducing wear on the drawbar ring.
The swivel drawbar stand folds under the drawbar, so that it does not get removed or lost.

The spring is retained by a 20mm top plate and high tensile bolts on the Rootking & Majestic ranges and by U bolts on the Harvester range.
The drawbar can be pivoted in several positions so that the ride of the trailer can be adjusted to suit the tractor or trailer wheel height.
The adjustment will alter the load imposed on the tractor drawbar. For example; the drawbar can be raised in wet conditions, distributing more weight to the tractor which will reduce the risk of it getting stuck.

We recommend setting the front of the body 1" (25mm) higher than the rear when the trailer is empty, so that when filled, the give in the spring allows the trailer to ride level. Set the front higher than the rear for a more comfortable ride.
In conclusion, the Larrington drawbar’s unique features are:
Swivel drawbar towing eye
Swivel drawbar stand
Spring held by 25mm plate (Rootking & Majestic)
Adjustments for levelling and tyre height correction.