Right Background
 
Small Utility Trailers


Page: [1] Previous Page

Tumble Tip Trailer                   Patent Pending

A concept by George Mc Neil, a simple drawing, one man with a dream, the difference is "we listened", as we do to all our customers, and hopefully the dream becomes reality.

Georges' idea was to create a small utility trailer useful to many trades, it would be low, but have a large capacity by using the space between the wheels as part of the body capacity, and so the "Tumble Tip" Trailer was invented.

We propose to build 4 - 6 - 8 & 10 ton capacity trailers, all with the same principal and design, but look what could you use this trailer for, here are some ideas.

The lower floor width is the same as a pallet or a Hesston bale of straw, and the length is 8ft so put your pallets on the inside.

Carry a bale of straw around your stable, and as you use the straw, tip the trailer sliding the straw to the end, and with the double acting rams, bring the body back down, so there is no need to climb in the trailer.

Put a water bowser in the bottom, tip the trailer and use it as a sprayer. Its strong enough to stand soil and stone, and with easy opening stable doors at the back that never interfere with the emptying load.

Now look at the shape from the end, and yes, with some additional parts you can load those customers, shooters, school children, friends and family and take them for a ride around the farm, "Tumble Tip" what a neat idea.

Click here for more product images

a

6 Ton Super Strong Utility Dump Trailer

Soil - Stone - Rock and general abuse, this trailer is designed to take it. With a load carrying and tip ability of 6 tons, you can be sure the job will get done. The chassis is formed from 6mm plate into "C" sections, then internally plated and fully welded forming the back bone of strength, complemented by the high grade and swivel drawbar stand. The body is fully formed also from 6mm plate, great strength is created in this way reducing damage which occurs from rock or site impact.

The single axle with a 65mm beam, haxing single line hydraulic brakes 300 x 60 with 8 stud hub. This trailer can be built and designed to customers requirements.

Specification:

Chassis: 6mm folded and formed plate into "C" sections the plated and fully welded.

Body: 6mm folded and formed plate

Brake: Single line hydraulics

Axle: 65mm beam 6 stud (300x60)

Tyre: 400/60x15.5

Lights: Side and rear lights to D.O.T Spec with rear light guards

Click here for more product images

Page: [1] Previous Page

 

 All Rights Reserved | Terms & Conditions | © Larrington Trailers | Tel: (01205) 353 124 | Email: richard@larringtontrailers.com